Вакуумный упаковщик TURBOVAC S40 GAS

Vacuum sealer moreover, the required amount of the S40 is used in the food industry and catering for vacuum packaging of food, liquids and ready meals, as well as for packing medicines, electronic products and chemical industries. When using this device to achieve a higher degree of vacuum, which prolongs the shelf-life of food products. Housing and chamber made of stainless steel AISI 304.

The set includes inserts to reduce the volume of the working chamber*.

Functions:

• Function "Soft wire": for the packaging of sensitive products (fresh fish, soft cheeses, pickles) or products with hard protrusions is gradual (slow) the air inlet into the chamber vacuum packer, so the package has time to take shape products
• Function "Conservation of mass"

Features:

• 9 software package
• Touch control of the evacuation process with an accuracy of 0.1 ATM**
• Low power consumption
• Easy to control
• Transparent lid for monitoring of the packaging process

Additional features:

• Cycle time: 15 to 25 sec.
• The maximum height of the Packed product: 180 mm
• The size of welding seam: 2x3,5 mm

Accessories (to be ordered separately):

• The gas filling function***
• Trim package: S Machines have a double welding seam by default. Instead of double seam optionally available welding / seam edging: welding the second heating element is replaced with the cutting heating element (thin filament), melts it right through the package and thus cuts off the excess film precisely along the seam.

* Applicable in cases where the product does not occupy the entire volume of the chamber. Inserts are used to increase the performance of the hardware (increasing the speed of pumping air from the chamber).

** The equipment is fitted with an accurate pressure sensors and the device performs every function automatically until it reaches the required (set) pressure. Thus the result of executing the specific operation is not dependent on the volume of air in the vacuum chamber or the ambient pressure, which ensures consistent quality of packaging.

*** When using the device in a mode of vacuum gas need to connect it to the container with the process gas. The gas mixture is chosen based on the product to be packaged. In addition to the required cylinder reduction gear (cylinder pressure of 100 bar, nominal pressure for the device - 1 bar).