Тестомесильная машина ПЕНЗМАШ ТММ-140 без дежи

Mixing machine TMM-140 without the bowl is designed for batch mixing of semi-finished products and dough made from wheat and rye flour with humidity of no less than 33% in moving the non-rotating hopper with 140 litres for the catering.

Specifications The maximum load of the bowl on the flour - no more than 50 kg.

Geometric volume of the bowl - 140 l The performance of the mixing test under maximum load - not more than 550 kg/h. Time kneading the dough with humidity of 35% - 6,0 min. Maximum power consumption: - When kneading the dough - no more than 1.5 kW. - When lifting-lowering of the traverse - not exceeding 0.37 kW.

Kneading the body - alloy carbon steel.

Kneading body stainless steel - made to order ( +3000 rubles to the cost)

Overall dimensions, not more: - Length - 1280 mm. - Width - 850 mm. - Height when lowered traverse - 1020 mm. - Height with raised boom - 1510 mm. Machine weight - 500 kg.

The base 1 serves as a supporting surface of the machine. In the base plate there are two holes for attaching the mixer to the floor (see figure 2). On the surface of the base are guide bars and stops to allow rolling of the bowl on the base and lock it into working position.

Frame 2 is a frame welded construction, which is fastened to the base with bolts.

In the upper part of the frame is located a fixed axis with bearings for mounting the frame 3. Inside the frame there is a panel and electrical micro switch that is triggered when the rolling of the bowl to position for kneading the dough.

The frame is a welded construction, on which are mounted the lifting mechanism frame 4 and the drive kneading of the body 5. The lifting mechanism frame consists of an electric motor, V-belt drive and screw. Nut screw pair has two protruding axis, in contact with the vertical grooves of the prongs is fixedly mounted on the axis of the frame, allowing the lifting frame at an angle of 55 0 with respect to the horizontal axis.

The drive kneading of the body consists of motor, V-belt transmission and gearbox having two gear pairs. The toothed wheel of the first pair being in mesh with a gear on the axis of the pulley belt transmission, provides the rotation around its axis kneading body 6 mounted on the output shaft. Gear of the second pair, located on the output shaft, objetivas around a fixed gear, provides the movement of the output shaft in a circular path around the axis of the bowl.